Commando FM-870 Owner's Manual download pdf (Page 15)

JAN/07/2003

RST872

- (2-second)

Enable / Disable Bi Sound (Bi) While

Pressing Button

1. Screen Lamp ON: Press and hold the

button one second, with one melody sound and the LCD

screen lamp will turns on for 5 seconds

2. Power Save Mode: While the power save mode, the LCD remote transmitter uses “0” current to save the

battery power.

Entry: 1. Press & hold the

button for 5 seconds, with one melody sound and

icon on the LCD screen to indicate entry the “power save mode”.

2. Under the “Active Arming Mode” and Disarm mode. Turn the ignition switch

to on, the LCD remote transmitter will automatically entry the “Power

Save

Mode”

Exit: Press any button of the LCD remote transmitter to exit the “Power Save

Mode”.

3. Clear the Flash Icon and Melody Sound: Press the button 3 times within 3 seconds will clear the

flash icon and melody sound on the LCD screen transmitter

4. Stop The Trigger Melody Sound:

While triggering the alarm the LCD screen will alert user through

melody sound and flashing trigger icon, press any button on the LCD remote transmitter to stop melody

sound

only.

5. Button Lock: It is useful if you want to disable the transmission function of the remote control temporarily

to prevent from any inadvertent pressing of buttons by others. Press the

button

first, within 3 seconds press and hold the

( ) button for 2 seconds to activate or

cancel the button lock function, the

icon will displayed on the LCD screen to

show the LCD remote transmitter is on “Button Lock”.

6. Vibration / Melody Mode:

It is useful when you are in a noisy place and difficult to hear beep sound from the

remote control as the remote control in this mode, vibrates itself if your security

system is triggered.

Press the

button first, within 3 seconds press and hold the ( ) button

for 2 seconds to select the mode of vibration or melody, the

icon will displayed

on the LCD screen to show the LCD remote transmitter is on vibration mode.

7. Enable / Disable Bi Sound While Pressing Button:

It has a short “bi” sound while pressing the button of the LCD screen transmitter

If you want mute the “bi” sound mute always while press button. Press the

button first, within 3

seconds press and hold the

(Bi) button for 2 seconds to disable the “bi” sound.

8. Low Battery Indication:

When the power of the battery weakens, it has two short “bi” sound and flash

icon while pressing

the button of the LCD screen transmitter.

9. Set Up Fixed Count Down Timer:

1. Press the

button first, within 3 seconds press and hold the ( ) button for 2 seconds, the

LCD screen will shows

icon and timer (ie. 0:10) ,

2. Press the

( ) button again showing next order time on the screen ( ie.0:20), press them again

(ie.0:30)…..and so on.

3. Leave the buttons starting count down then

icon flashes

Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2

hours maximum.

2.When count down timer showing 0:00 means to turn off the timer.

3. Press

button for real time indication when the timer is counting down.

10. Out Of Range Indication:

1. If within the range, the

icon will display on the LCD screen.

2. If you are out of range, the

icon will disappear on the LCD screen.

D. TIMER SETTING:

1 2 ... 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Commando FM-870 Owner's Manual Page 15

Comments to this Manuals

Related products and manuals for Remote starters Commando FM-870