Commando FM-870 Installation Manual download pdf (Page 16)

FEB.20, 2003

RST872

Without this feature With Dome light turns

on after ignition off

(45 second door

by-pass)

Without Car-jack

mode

Active Car-jack mode Passive Car-jack

mode

Panic with Ignition

off

Panic with Ignition on

& off

Panic with Ignition

on & off. Panic

with No time limit.

Without Panic

function.

Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to

confirm exit.

3 / 30 seconds Delay Door Ajar Error Chirp:

This feature controls the error chirp that is generated if the system is armed with the door trigger active. This

useful in a vehicle that has a long dome light delays after the door has been closed. If the system is armed

before the dome light has turned off, the security system will generate the door trigger error chirp. Use this

feature to disable the door open error chirp.

With Dome light turns on after ignition off:

Some vehicles turn on the dome light when ignition key is turned off. After remote start, with alarm on, a false

alarm may occur when the run time elapses and the dome light comes on. To prevent this from happing,

program Alarm Feature

I – 5 to “With Dome light turns on after ignition off (45 second door by-pass)”.

ALARM FEATURE “II” PRORAMMING:

1 Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position.

2 Push the Valet switch

4 times and hold it until two chirps with a long chirp is hearing then release the

valet

switch. You are now in the Alarm feature

‘II’ programming mode.

3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.

Press

ransmitte

Button

One Chirp / LED

one pulse

Factory Default

Setting

Two Chirps / LED

two pulses

Three Chirps / LED

three pulses

Four Chirps / LED

four pulses

0.8-second Door

lock pulses.

3.5-second Door

lock pulse.

Double pulse unlock

Ignition controlled

door locks &

unlocks

Ignition controlled

door locks only

Ignition controlled

door unlocks only

Without ignition

controlled door

locks & unlocks

Pathway illumination

feature “off”

Parking light turns

“on” for 30- second

upon an unlock

signal

Parking light turns

“on” for 30- second

upon an unlock

signal & 10-second

upon a lock signal.

H2/5 Brown Wire =

Constant Siren

output

H2/5 Brown Wire =

5-second pulse

Siren output

H2/5 Brown Wire =

Random pulse Siren

output

H2/5 Brown Wire =

Horn Output

Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to

confirm exit.

ALARM FEATURE “III” PRORAMMING:

1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.

2 Push the Valet switch

6 times and hold it until three chirps with a long chirp is hearing then release the

valet switch. You are now in the Alarm feature

‘III’ programming mode.

3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Comments to this Manuals

No comments

Commando FM-870 Installation Manual Page 16

Comments to this Manuals

Related products and manuals for Remote starters Commando FM-870